How To Deal With Granite Slab Scratches

Granite slabs are believed to have been seen in many places. They are the stones that we usually use. However, when there are many people, accidentally or intentionally throwing garbage will seriously damage the roadside stones, leaving scratches. So what do we do to deal with the scratches?

The first is to say that we have to put a little water on the ground, pour the granite slab stone polishing slurry into the water, the ratio of water to pulp is 1:1, and the red scouring pad is matched with the stone weighting machine for grinding. The controllable area of the operation should not exceed 2 meters, the application area of granite slab stone polishing slurry is about 150-300 square meters per gallon. At first, the granite slab stone polishing slurry is evenly spread in the controllable area, and is ground at a uniform speed for 2-3 minutes. After scratching with glass, observe whether the scratches of the stone have been grounded, and whether the brightness of the stone has been improved. If you feel that the brightness is not ideal, you can continue to polish the water again. If you are satisfied with the brightness of the stone, you can stop. Grind, add appropriate amount of water to clean the floor, and reuse the remaining marble polishing slurry after cleaning.

For the attention of granite slabs, we all know that in order to ensure the use of granite slab manufacturers, the correct use is very important, so that the use of granite slabs can be used better.