Granite Slab Maintenance

There are also two kinds of chemical materials: one is granite recrystallization, and the other is granite slab recrystallization. The basic principle of stone crystallization is to combine the heat generated by some special chemical materials by mechanical friction with the structure of the surface layer of granite slab to produce a new hard crystalline layer, using these stone recrystallization systems for granite and granite slabs. Blank maintenance can give the granite slab floor a bright, fresh and natural effect. It also improves the wear resistance of the granite slab surface, making it more durable. In general, granite grounds can be used for such maintenance in two years. However, due to the difference in texture of the granite slab ground, it usually takes about 6 months to do such maintenance, but it depends on the degree of wear on the surface of the granite slab. Before the recrystallization, the granite slab needs to be professionally cleaned to ensure the construction effect. The practitioners must establish a scientific and rigorous working attitude.

Tools and materials for cleaning: Tools: scrubber, nylon brush, suction machine, mop, bucket. Use of materials: weak base or neutral detergent.

Operation method: 1. Pour the diluted stone cleaning liquid into the washing machine, and move forward from the back, and walk in a straight line, so as to avoid omission.

2, scrub the water machine at the same time, while scrubbing and suctioning the sewage, the place where the washing machine can not be washed can be wiped with a mop foam cleaner and then scrubbed.

3. After cleaning the ground sewage with a cleaning agent, wash it again with water, and dry it with water.

4. Note: It is forbidden to use acidic detergent and powder detergent on the clean floor, otherwise it will damage and corrode the surface of granite slab.